International Solar Energy Research Center Konstanz indicates that the lowest LCOE of 1¢/kWh is expected in 2021/2022 and the leading technologies to achieve this goal will be bifacial module plus tracker system. The single axis or multi axis tracker system plus bifacial module will require higher full-load operation capacity and pose more challenges for the inverters. Sungrow’s SG250HX-IN can run at full load for a long time attributing to reliable and robust components selection with advanced design. Additionally, SG250HX-IN is embedded with 12 MPPTs to adapt complex terrain and enables 26A input current per string, perfectly matching the bifacial modules. SG250HX-IN also
provides reserved power supply and communication interface to tracker system. SG250HX-IN has 0.3~0.5% higher yield compared with its competitor through PVsyst simulation, which will bring a higher performance.

Bigger & Flexible Block, Cost Saving

As a recent study shows that the global market for large-scale PV installations is shifting to bigger block design to reduce LCOE. Based on the cost comparison of different capacity block, 6~9.6MW block enables lowest cost. Sungrow’s SG250HX-IN is suitable for any block size between 3MW to 9.6MW and higher depending on customer’s design. The SG250HX-IN typical system diagram is shown as figure 3.

The SG250HX-IN and communication device supports PLC (Power Line Communication), which decrease communication cable cost. Detailed CAPEX study indicates that SG250HX-IN will save 0.2~0.3 USD cent/Wp compared with competitor.

Adapt to Harsh Environments

In recent years, more solar plants are installed in coastal areas and desert areas which pose challenges to inverters. With smart forced air-cooling technology, the SG250HX-IN can work stably in scorching heat. On account of lower internal temperature than the temperature in natural cooling method, the lifetime of the SG250HX-IN will be longer. Due to separate electrical/cooling chamber design, SG250HX-IN provides an ingress protection rating of IP66 for all chambers and anti-corrosion design with C5 protection degree, making it ideal for applications in coastal areas, chemical industrial region and other typical harsh conditions.

Smart Monitoring Makes Fault Diagnostics Easy

Sungrow can provide a complete monitoring solution for SG250HX-IN which includes COM100 (Smart Communication Box), Insight (Local SCADA), iSolarCloud (Remote SCADA), PPC (Power Plant Controller). Sungrow’s monitoring solution supports I-V curve scanning and diagnosis which can finish a full-scale plant diagnosis in 15 minutes with an accuracy less than 0.5%. It makes easy to locate faults caused by dust shielding, glass panel cracking, dirt shielding, diode short circuit, gate line disconnect and PID attenuation in order to reduce power
generation loss.